Benutzer:Lizzyhagen/Walking foot

Dieser Artikel (Walking foot) ist im Entstehen begriffen und noch nicht Bestandteil der freien Enzyklopädie Wikipedia.

Wenn du dies liest:

• Der Text kann teilweise in einer Fremdsprache verfasst, unvollständig sein oder noch ungeprüfte Aussagen enthalten.
• Wenn du Fragen zum Thema hast, nimm am besten Kontakt mit dem Autor Lizzyhagen auf.

Wenn du diesen Artikel überarbeitest:

• Bitte denke daran, die Angaben im Artikel durch geeignete Quellen zu belegen und zu prüfen, ob er auch anderweitig den Richtlinien der Wikipedia entspricht (siehe Wikipedia:Artikel).
• Nach erfolgter Übersetzung kannst du diese Vorlage entfernen und den Artikel in den Artikelnamensraum verschieben. Die entstehende Weiterleitung kannst du schnelllöschen lassen.
• Importe inaktiver Accounts, die länger als drei Monate völlig unbearbeitet sind, werden gelöscht.

Vorlage:Importartikel/Wartung-2020-01

Walking foot

A walking foot is a mechanism for feeding the workpiece through a sewing machine as it is being stitched. It is most useful for sewing heavy materials where needle feed is mechanically inadequate, for spongy or cushioned materials where lifting the foot out of contact with the material helps in the feeding action, and for sewing many layers together where a drop feed will cause the lower layers to shift out of position with the upper layers.

A sewing machine might have a single walking foot, or two walking feet with alternating action. A walking foot may be combined with another feed mechanism, such as a drop feed or a needle feed.

It is not a common sewing machine attachment for household use other than for quilting, but this type of feed is common in industrial heavy duty machines. Some household machines are marketed as having a walking foot, but actually have a puller feed. However, almost all household sewing machines use a standard connector for their presser foot, and so add-on walking foot attachments are available.

"Plaid Matcher" attachments

"Plaid matcher" substitute for a walking foot

A "plaid matcher" is similar to a walking foot, but unlike a walking foot it does not actually contribute any forward or backward feeding force. Rather, it applies cyclic downward pressure onto the material onto the feed dogs, in time with the feed dogs, so as to increase the friction between layers of the material. The increased friction reduces the slipping of lower layers (which contact the feed dogs) versus the upper layers (which tend to be held in place by the presser foot).

The plaid matcher's downward pressure is more helpful than that of the presser foot because the plaid matcher's foot can slide freely forward and back in order to move with the feed dogs. Consequently, it appears to be a walking foot, even though the only force it generates is downward.

The plaid matcher is powered by the machine's shank.